I wanted the Big Berkey for a very practical reason: I was tired of finding an empty water pitcher when I went to make my morning coffee. Our upstairs family room is where my son and his friends hang out, and apparently drinking the filtered water is much more appealing than refilling it.
When I was offered a Big Berkey to review, I thought a larger water filtration system on the counter might be just what that room needed. After a few setup challenges and a lesson in measuring counter space, I can honestly say the water tastes great. There are just a couple of things I wish I had figured out before getting started.
Disclosure: I received this product free for an honest review. I may earn a commission from affiliate links at no extra cost to you.
What Is a Berkey Water Filter?
A Berkey is a gravity-fed water filtration system. You pour water into the upper chamber, it passes through the filter elements, and the filtered water collects in the lower chamber. A spigot near the bottom lets you fill a glass, mug or other container.
It does not need electricity or a permanent plumbing connection to operate. That was part of the appeal for me: I wanted filtered water available upstairs without installing anything under the sink.
Berkey’s packaging describes its systems as “The Gold Standard in Gravity-Fed Water Filtration Systems.” The company points to its stainless steel construction, gravity-fed design and filter testing as selling points. For this review, my own experience centers on setting it up, using it at home and how the water tastes.
What Is the Big Berkey?
The Big Berkey is the 2.25-gallon model, or approximately 8.5 liters. It has two stacked stainless steel chambers, giving it more capacity than the little pitcher we had been keeping in our mini fridge.
You can browse the systems and accessories at The Berkey.
Why I Wanted One for Our Upstairs Family Room
We already had a Brita pitcher in the mini fridge upstairs, and that is the water I used for my morning coffee. The problem was that my son’s friends were always drinking it and leaving the pitcher empty.
I pictured the Big Berkey sitting on the counter so everyone could help themselves, with a larger supply available for my own morning coffee, too.

Measure for the Stand, Too
I measured the counter space before the Big Berkey arrived, and it seemed like a perfect fit. What I did not account for was the spigot being so close to the bottom. You need enough clearance below it to put a cup underneath.
A stand solves that problem. Berkey sells purpose-made options here: Stainless Steel Stand – BerkeyHome.
I ended up using one of the flower pot stands I already owned from a set. It was a perfect fit for the base and gave the spigot the height I needed.
Unfortunately, that extra height also meant the whole setup was too tall for the spot I had originally picked. It is in a somewhat awkward space for now, but it works!
My advice is to measure the complete setup: the unit, the stand and the space you need above it for refilling. Checking only the height of the filter itself is how I ended up rearranging things.

Unboxing and Getting Everything Ready
The stainless steel pieces arrived protected in wrapping, with the smaller parts and instructions packed separately. Once I had everything out, the initial setup looked a little intimidating.

There are chambers, filter elements, fittings and priming accessories to sort through. Having them all spread out made it easier to see what I was working with.

The included care sheet says to wash the stainless steel chambers in warm, soapy water, rinse thoroughly, then dry and polish them with a soft towel before assembly. Once I got going with the setup, it was not as bad as that first look at all the pieces made it seem.
Priming the Filters Was the Tricky Part
The biggest challenge for us was priming the filters. This is the step that pushes water into the filter elements to displace the air inside, allowing water to flow through them properly.
Our First Attempt with the Blue Adapter
The blue piece that connects to the faucet was incredibly tight on ours. I could not get it attached by myself; it took both me and my husband to get it on.
Even then, water kept squirting out around the sides. We tried to make it work, hoped the filters had been primed enough and went ahead with assembly.

By the next day, there was still water sitting in the upper chamber. That was a pretty clear sign that our first attempt had not done the job.
The Smaller Priming Button Worked for Me
I tried again using the other priming method, with the small priming button held against a different faucet. That time, it worked!
I could see beads of water appearing on the sides of the filter, just as the instructions describe. It looks a little like the filter is sweating as the water moves through it.

Once the filters were properly primed and the system was set up again, it did not take long for the water to filter through.
My biggest setup tip is to give this step your attention and follow the instructions for the priming accessory you are using. If one faucet connection is a struggle, check the included directions for the alternative methods.

Think About How You Will Refill It
The other practical detail is getting water into that upper chamber. A spot beside a sink with a pull-out hose would make refilling convenient, provided you have enough room to reach the top.
The sink it sits next to is small, so I ended up filling ours with a large cup. You do not have to connect the Big Berkey to the faucet for everyday use; you just need a manageable way to pour water into it.
Between the spigot clearance, the stand height and the refilling space, placement takes a little more thought than simply finding an empty spot on the counter.
How Does the Big Berkey Water Taste?
This is where the Big Berkey really won me over. Our tap water usually has a noticeable chlorine smell, and I will not drink it straight from the faucet.
The water I poured from the Berkey was clear, with no smell that I could detect and a fresh taste. I can honestly say it tastes great.
After dealing with the priming frustration, it was a relief to get to the part I actually wanted: having filtered water available upstairs.

Would I Recommend the Big Berkey?
Yes, I would recommend the Big Berkey based on my experience. I am very happy with the taste of the water, and the larger capacity makes sense for the family room where my son and his friends spend so much time.
My main frustrations were getting the filters primed and realizing I had measured for the unit without allowing for a stand. Both are things I would plan for differently now.
Do not let the initial setup intimidate you, but do give yourself time to work through the instructions. Most of all, measure the full height with a stand, leave room for a cup under the spigot and decide how you will refill the upper chamber. Once I worked those things out, the fresh-tasting water made the effort worthwhile.
Discover more from Momtastic Mommy Blog
Subscribe to get the latest posts sent to your email.
One thought on “Big Berkey Review: Better-Tasting Water for Our Family Room”